How the body works
What a Spirometry Test Actually Measures
If you have ever blown into a tube at a clinic, you produced numbers that are genuinely interpretable once someone explains them. 📊
Spirometry is the core lung function test: cheap, quick, non-invasive and central to diagnosing asthma and COPD. The results sheet looks forbidding and is mostly three numbers.
The test 🫁
You take the deepest breath you can, seal your lips around a mouthpiece, and blow out as hard and as fast as you possibly can, continuing until your lungs are as empty as they will go — usually at least six seconds. It is repeated several times and the best reproducible effort is used.
Effort matters enormously, which is why technicians coach loudly. A poor effort produces results that look like disease. 📣
The three numbers that matter 🔢
FVC — Forced Vital Capacity
The total volume you can blow out after the deepest possible breath in. It reflects how much usable air your lungs hold.
FEV1 — Forced Expiratory Volume in one second
How much of that total you can get out in the first second. It reflects how freely air moves through your airways. Narrowed airways slow the flow, so FEV1 falls.
FEV1/FVC ratio
The proportion of your total that leaves in the first second. In healthy adults this is typically around 0.75–0.80 or higher, falling somewhat with age. This ratio is what distinguishes the two main patterns of lung disease. 💡
Reading the patterns 📈
Obstructive pattern
FEV1 reduced, FVC relatively preserved, ratio reduced. Air is in there but comes out slowly because airways are narrowed. This is the pattern in asthma and COPD.
The distinguishing test is reversibility: spirometry is repeated after a bronchodilator. A substantial improvement suggests asthma, where the narrowing is reversible. Little change suggests COPD, where it is largely fixed.
Restrictive pattern
FVC reduced, FEV1 reduced proportionally, ratio normal or high. Air flows freely but there is less of it — the lungs cannot expand fully. Causes include lung fibrosis, chest wall problems, neuromuscular weakness and significant obesity.
Spirometry suggests restriction but cannot confirm it; that needs full lung volume measurement. 🔬
Percent predicted ⚖️
Raw numbers mean little on their own because normal values depend on height, age, sex and ethnicity. Results are reported as a percentage of predicted for someone of your characteristics, with around 80% and above generally treated as normal.
Modern reporting increasingly uses the lower limit of normal rather than a flat 80% threshold, which is more accurate particularly at the extremes of age.
What spirometry does not tell you 🚫
- Total lung capacity or residual volume — you cannot blow out what will not come out.
- Gas transfer efficiency — that needs a diffusing capacity test, which can be abnormal in emphysema even when spirometry looks acceptable.
- Blood oxygen — that is pulse oximetry or a blood gas.
- The cause — spirometry describes a pattern. Imaging and history provide the diagnosis.
Getting a good test ✅
- Avoid a heavy meal beforehand; a full stomach restricts the diaphragm.
- Wear loose clothing.
- Follow instructions on withholding inhalers — you may be asked to skip doses before a reversibility test, and that instruction comes from your clinician, not from an article.
- Mention a recent chest infection; it can temporarily depress results.
- Give maximum effort on every attempt. A half-hearted blow produces a result that looks like disease.
If you have persistent breathlessness, a chronic cough or wheeze and have never had spirometry, it is a reasonable thing to ask about. Our red flags guide covers when to seek assessment more urgently.